| PART |
Description |
Maker |
| MAX138 MAX138CMH MAX138CPL MAX138CQH MAX138EPL MAX |
3?Digit A/D Converters with Bandgap Refrence and Charge-Pump Voltage Converter
From old datasheet system
3Digit A/D Converters with Bandgap Refrence and Charge-Pump Voltage Converter
3?Digit A/D Converters with Bandgap Refrence and Charge-Pump Voltage Converter
TRANS DARL NPN 40V SMD SOT23
SWITCH, MJTP1162A, PB, SPST, SMD
3??igit A/D Converters with Bandgap Refrence and Charge-Pump Voltage Converter
18-Bit Bus Transceivers With 3-State Outputs 56-SSOP -40 to 85
|
MAXIM INTEGRATED PRODUCTS INC
MAXIM - Dallas Semiconductor
MAXIM[Maxim Integrated Products]
Maxim Integrated Products, Inc.
|
| HR151-1205 HR153-1215 HR151-1215 HR151-2815 HR151- |
D-sub connectors, Right angle, Through hole type; HRS No: 211-0302-0 57
DC-to-DC Voltage Converter DC - DC电压转换
DC-to-DC Voltage Converter 型DC - DC电压转换
|
Aimtec
Laird Technologies, Inc.
|
| WU400 WU100 WU101 WU102 WU103 WU104 WU105 WU106 WU |
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage -12.0 VDC. Output current -400 mA. Input current 10 mA(no load), 2520 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage -15.0 VDC. Output current -333 mA. Input current 10 mA(no load), 2510 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 15.0 VDC. Output current 667 mA. Input current 10 mA(no load), 2510 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 3.3 VDC. Output current 3000 mA. Input current 10 mA(no load), 2470 mA(full load).
10/15 Watts WU Series 10/15瓦吴系列
Nickel Cadmium Battery; Voltage Rating:1.2V; Battery Size Code:Sub C; Battery Capacity:2100mAh
Nickel Cadmium Battery; Voltage Rating:1.2V; Battery Size Code:Sub C; Battery Capacity:1900mAh; Battery Terminals:Pressure Contact
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 5.0 VDC. Output current 2000 mA. Input current 10 mA(no load), 2620 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage 12.0 VDC. Output current 800 mA. Input current 10 mA(no load), 2520 mA(full load).
DC/DC converter, 10/15 watts. 4:1 input range. Input voltage 4.5-6.0 VDC. Output voltage -5.0 VDC. Output current -1000 mA. Input current 10 mA(no load), 2620 mA(full load).
|
XPiQ
Electronic Theatre Controls, Inc.
ETC[ETC]
List of Unclassifed Manufacturers
International Power Sources
|
| TC1320EOA TC1320EUA TC1320 TC1320EOATR TC1320EUATR |
The TC1320 is a serially accessible 8-bit voltage output digital-to-analog converter (DAC). The DAC produces an output voltage that ...
The TC1320 is a serially accessible 8-bit voltage output digital-to-analog converter (DAC). The DAC produces an output voltage that ranges from ground to an externally supplied reference voltage. It operates from a single power supply that
8-Bit Digital-to-Analog Converter with Two-Wire Interface
|
MICROCHIP[Microchip Technology]
|
| LXR1240-6M1 LXR1701-6 LXR1740-6M1 LXN1240-6M1 LXR- |
460 Watt, input voltage range:85-264/90-350V, output voltage 25.7-29.3V,(16.9A) AC/DC converter
345 Watt, input voltage range:85-264/90-350V, output voltage 25.7-29.3V,(12.6A) AC/DC converter
460 Watt, input voltage range:85-264/90-350V, output voltage 51.4-58.6V,(8.4A) AC/DC converter
375 and 500 Watt AC-DC Converters 37500瓦AC - DC转换
375 Watt, input voltage range:85-264/90-350V, output voltage 49.4V,(7.5A) AC/DC converter
345 Watt, input voltage range:85-264/90-350V, output voltage 51.4-58.6V,(6.3A) AC/DC converter
|
Vishay Intertechnology, Inc.
POWER-ONE[Power-One]
http://
|
| RN5RY201A RN5RY201A-TL RN5RY201A-TR RN5RY201C RN5R |
VFM step-up DC/DC converter controller. Output voltage 3.8V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.7V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.6V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.5V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.5V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.4V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.3V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.3V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.2V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 2.5V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.2V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 2.1V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.0V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 2.4V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 2.1V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.1V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.8V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.8V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.8V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.7V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.7V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.7V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.6V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.6V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.6V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.5V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.5V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.5V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.4V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.4V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.4V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.3V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.3V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.3V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.2V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.2V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.2V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 4.1V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 4.1V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 4.1V. Taping type TL
VFM STEP-UP DC/DC CONVERTER CONTROLLER 0.05 A SWITCHING CONTROLLER, 180 kHz SWITCHING FREQ-MAX, PDSO5
0.5 A SWITCHING CONTROLLER, PDSO5
VFM step-up DC/DC converter controller. Output voltage 3.1V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.1V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.3V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.4V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 2.1V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 2.2V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 2.3V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.2V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.2V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.3V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.4V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.4V. Antistatic bag for samples
VFM step-up DC/DC converter controller. Output voltage 3.5V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.6V. Standard taping type TR
VFM step-up DC/DC converter controller. Output voltage 3.7V. Taping type TL
VFM step-up DC/DC converter controller. Output voltage 3.7V. Antistatic bag for samples
|
RICOH[RICOH electronics devices division]
Ricoh Co., Ltd.
RICOH COMPANY LTD
|
| ADVFC32KNZ ADVFC32 |
Low Cost Monolithic Voltage-to-Frequency (V/F) Converter
Voltage-to-Frequency and Frequency-to-Voltage Converter
|
Analog Devices
|
| TC7660 TC7660MOA TC7660MOA713 |
Charge Pump DC-to-DC Voltage Converter
The TC7660 is a pin-compatible replacement for the Industry standard TC7660 charge pump voltage converter. It converts a 1.5V to 10V input to a corresponding – 1.5V to -10V output using only two low-cost capacitors,eliminating indu
|
http://
Microchip
|
| 2SC5459 |
Transistor Silicon NPN Triple Diffused Type Switching Regulator and High Voltage Switching, DC-DC Converter, DC-AC Converter Applications
|
TOSHIBA
|
| TSL253 TSL254 |
PRECISION HIGHSPEED LIGHTTOVOLTAGE CONVERTER
PRECISION HIGHSPEED LIGHTTOVOLTAGE CONVERTER
|
TAOS
List of Unclassifed Manufacturers
ETC
|
